| |
|
|
|
WHY
IS T6 LCD COUNTER
?
|
| |
This device
uses where there is only begining signal, no
periodic signal. In this cases classic counter device
not works, Programable counter device should be used .
|
|
|
HOW DOES IT OPERATE
? |
| |
It feeds directly from energy of PTT line. At
first price and time of local ,PTT.
International and GSM numbers
must be entered by PC or telephone .
Device checks numbers of
called and determines where is called, compares these numbers with
before numbers which were in its memory .and
determines
total call
by multiply price of unit counter with
time of call.
It
saves last 1000 call which are made in its memory at the same
time.
When call is made ,number which will dialed,it appeared on
th screen. When beginning signal is came from PTT, (or device) it
starts billing.
Price, unit counter and time of call are appeared
on the screen at the same time. If new call is made without "RESET"
button pressed, It continues calculating price where is remained.
When "RESET" button is pressed,screen will cleaned ans
billing ,unit counter,duration time start from zero.
|
|
|
HOW DOES IT COUNT THE
COSTS ?
|
| |
The device
begins to billing automatically as soon as the dialed number
answers the call, If there are any problem at system button of
( # ) is pressed for starting call. When receiver is closed ,billing
also stops.
|
|
|
SEEING PRICE
WITHOUT LIFT RECEIVER
|
| |
The telephone
machine could be away from the call counter. In order to
display the cost of a call without lifting the telephone
receiver, the "ecran” button should be pressed,
press of "ecran" buttton means lift receiver.
|
|
|
For making below
transactions press * * and entering
password |
|
After
true password is entered.PRG is seen at display and then
below operations can be done.
|
|
|
SEEING
DAILY PERIODIC TOTAL |
| |
For seeing daily
and mountly periodic total ,press 1. For turn back PRG
press #
|
|
|
ENTERING PRICE
AND
TIME FOR LOCALS |
| |
Press 5 then
three digit prefix number are entered and then press * ,after
that price is entered as 5 digit.then press * , after
that time is entered 5 digit. First digit of time is
1/10 sec.
|
|
|
ENTERING
PRICE and TIME for International |
|
|
Press 6 then without
pressing 00 , country's code is entered. Then press *
,after that price is entered as 5 digit .then press * ,after
that time is entered 5 digit. First digit of time is
1/10 sec.
|
|
|
CHANGING
PASSWORD |
|
|
For entering new password
press 8 .6 digit new password is entered and then press
*
|
|
|
PROGRAMING
FROM REMOTE |
|
|
Dial the number's user which
will programmed and press * * then enter fixed password.
The vendor who entering program from remote can
be observe program herself if he uses counter device.
|
|
|
ADDITIONAL
DISPLAY |
|
|
The customer is allowed to
see the amount with a additional monitor.
There are no additional buttons on this monitor. In
addition, the customer can not reset the additional
device.
The additional device operates as soon as the telephone
receiver is lifted.
The additional divice is connected by a 6-wire cable.
The max. distance from call counter to additional
display is 15 mt.
The additional device recieves its power directly from
the PTT
|
|
|
TECHNICS FEATURES
: |
| |
Entering signal |
: |
12/16 Khz
, reversal signal, C tone |
|
Screen |
: |
9 digit LED display. |
|
Periodic total |
: |
9 digit |
|
Feeding |
: |
It feed directly from
PTT ,not need apart feeding |
|
Weight |
: |
300 gr |
|
Dimension |
: |
4.5 x 13.5 x 17 cm |
|
|
|
MONTAGE
for VOIP SYSTEM : |
| |
PTT line is connected to
ADSL modem. Output of ADSL is connected gateway.
FXS of gateway is connected with RJ11 to line port
of voip counter device. Telephone is connected to
phone port of voip counter device.
|
|
|
MONTAGE FOR TELEPHONE
There are two differtent installations |
|
Montage
without monitor; PSTN line
must be pulled out from telephone and put on
into line port of counter.2 cable which is given
with counter must be connected between phone port
of counter and port of telephone.
|
|
|
|
Montage
with monitor; PSTN line must
be pulled out from telephone and put on into
line port of counter.6 cable which is given with
counter must be connectted between
data port of
counter and data port of monitor.2 cable which is
given with counter must be connected between phone
port of monitor and port of telephone
|
|
 |
|
|
|
